The fastest and easiest assembly connection for wooden elements
What is a G.U.T. Assembly Connector?
G.U.T. connector (reg. Patent) is a new development for the rational and cost-effective positioning of system elements.
The connector is made if high-strength polyamide, which can be recycled without any difficulty.
It is fixed by means of customary 6-mm-thick.
Advantages of the G.U.T. assembly connector
- Weather-independent system
- Precise and rapid positioning of the element
- Shortest possible, vertical engagement distance
- Excellent sliding characteristics
- Simple assembly
- Independent of different wail thicknesses
- Most simple production logistics
- Minimum portion of wood in wall (thermal bridge)
- Excellent cost-benefit ratio
Assembly
The assembly can be positioned as required in a keyway with a depth of 17mm and a width of 31mm. If necessary, a small piece of a spring can also be inserted to align the element in a central position. The G.U.T.
assembly connector can be positioned with either the following described template or by means of simple
measurement.
Vertically, the connector exhibits a play of +/- 7 mm to accommodate any possible assembly tolerances. The connector has an overall length of 290 mm.
To facilitate precise location of the element, the distance between the Inner edge of the upper or lower flange and the connector must be 100 mm.
The keyway can be positioned in the latter or in a supplementary Screwattached support. If necessary, an additional keyway can also be Milled for a jointing ring.
Planning and drawing with
